• Receipt of site information from customer along with TND/RND
• RFI check along with ensuring the site permissions
• Material reception at the sites and checking as per packing list. Intimate to the customer in case of any deficiency
• Hoisting of GSM/CDMA antennas on tower as per TND/RND
• Clamping and routing of RF cables from Shelter to Antennae
• Grounding the Antennae and RF cables at appropriate place
• Ensuring drip loop/Z loop at cable entry plate
• Ensuring no sharp bend on RF cables
• Fixing OGB
• Weather proofing
• Fixing EMPs/Surge arrestors along with connectorization in shelter
• Grouting the BTS
• Extending, power cables, E1 cables, grounding cables to BTS
• Fixing IGB and extending grounding to all peripheral equipment
• Fixing DDF
• Installation of Battery bank and rectifier
• Installation of internal cable try
• Installation of indoor jumpers
• Checking VSWR
• Switching on the equipment
• Commissioning the equipment as per defined procedure
• Power measurement
• Filling the check list and execution of quality audit

MW Installation and commissioning

Scope of works:

• Receipt of site information from customer along with TND/RND
• RFI check in near end and far end besides ensuring the site permissions
• Material reception at both ends and checking as per packing list and intimate the customer in case of exigency
• Assembling and hoisting of MW antennas & radios on tower in both ends as per TND/RND
• Clamping and routing of if cables from Shelter to Antennae in both ends
• Grounding the antennas and RF cables at appropriate place
• Fixing Transmission rack if required in both ends
• Installation & commissioning of IDUs in shelters
• Alignment of MW antennas till we achieve required receive level
• Grounding, weather proofing and labeling all cables in both ends
• Acceptance test